Phanteks NV7 is an impressive full ATX tower, which has tempered glass to enhance its beauty. You get to choose between two colors, black and white, that best suits your PC environment. This water-cooling gear has gained much hype these days. It has a beautiful casing that is meant to show off the internal segment of the device. So, now you can create a perfect PC with a seamless glass design. Built with premium material, the device indeed has a strong frame.
The mess design helps to maintain the airflow, and with this ultimate water-cooling configuration, you are ready to use the device with triple 360 radiator support. With dust filtration, you get to experience an ultra-fine performance. Now, it is time to provide the best cooling to the GPU.
So, if you are still wondering what makes Phanteks NV7 a worth buying product, then go through the specifications that we are about to discuss.
Inside the box:
- Phanteks NV7, which is packed with high-density foam and a black cloth.
- Phanteks signature screw assortment box
- A GPU support bracket
- ARGB wiring
- Two cover plates
- A microfibre cloth
- Some zip ties
Specifications:
- Dimensions: 253 x 532 x 586 mm (WxDxH)
- Form Factor: Full Tower
- Materials: Steel Chassis and Tempered Glass
- Motherboard support: ATX, micro-ATX, mini-ITX, SSI-CEB, E-ATX
- Front I/O: Microphone and Headphone Combo, Power Button, D-RGB Mode, D-RGB Channel, D-RGB Color, D-RGB Speed, 2x USB 3.0, USB-C Gen2
- Connectors: Power Switch, HD-audio, USB 3.0, 2x SATA Power, USB 3.2 GEN 2 Type-E, Power LED, 2x D-RGB Channel A, 2x D-RGB Channel B
- Expansion Slots: 8
- Vertical GPU Support: Yes
- Fans: 4 x 120mm (side), 3 x 120mm (top), 2 x 120mm (rear), 3 x 120mm/140mm (bottom)
- Radiators: Side up to 360mm, Top up to 360mm, Rear up to 240mm, Bottom-up to 360mm/280mm
- Max CPU Cooler Height: 185mm
- Max Graphics Card Length: 450mm
- Max PSU Length: 255mm
Phanteks NV7 Design Explained
Phanteks NV7 has a sleek design with 532 x 253 x 586 mm measurement. You can place it on the floor rather than the desk. It has tempered glass on the side, which can be removed during the installation process. In the back cable section or the I/O section, you will find the design to be quite appealing with a removable swing outer door. Along with that, you will also find that the front section is also beautiful.
Cable management
Owing to the cable routing, the cables are well managed at the bottom. When the rear or back door opens, you will find more cable routing, and as you close the rear door, the cables appear to be neatly tucked away.
Front section
At the front section, you will find 2 USB 3.0 Type-A ports and a USB 3.2 Type-C port. You will also get a combination of headphones and a microphone 3.5 mm jack. If required, you can remove the front panel as well, just like the rear panel, which is held with 2 thumb screws. On the top, you will find rectangular power buttons, which are meant for controlling the features of Phanteks NV7.
Control facilities
There is also a facility to control the 2-channel D-aRGB controller. The rear side has a perfect space for two 120mm fans or 240 mm radiators. You can also mount this fan or radiator outside to impart a cleaner look by removing the fan grille. You can move the right side of the aRGB strip by removing and rotating it 180 degrees, and also, the motherboard support is up to eATX.
The side fans are 120 mm, and four are supported to have a 360mm radiator. It also has an additional D30 fan. The bottom mount is supported by three 120mm fans and three 140mm fans, along with a single 280mm or 360 radiator.
Bracket orientation
You can orient the brackets in two ways: angled or turn them at 90 degrees. It also has a drain port which is meant for maintaining the system and is quite essential for the water cooler. To create a different mix of effects, the D-aRGB controller can manage two different color zones. Here, you also get the optional control for RGB-supported motherboards.
Other panels
The back panel also shows enough space to hold HDD or SSD support. Along with that, it also comes with cable management. The panel at the back can be removed to support two 2.5″ HDDs or SSDs, and the bottom panel supports two 3.5″ HDDs. The left panel cannot be removed, but it has a mesh design to maintain the airflow. This section can be set up as an intake or exhaust panel.
Price
The Phanteks NV7 comes at a price of $219.99. If you order online, you might also come across discounts.
What are the pros and cons of Phanteks NV7?
Understanding the pros and cons of Phanteks NV7 helps to make a clear and informed decision:
Pros:
- Enough RGB customization options
- Quality product within a reasonable price
- The bottom fan tray, which is rotatable
- Includes GPU Brackets
- Unique design with cable routing
- Compact cable management system
Cons:
- No fans are present
- The rear side is not tight enough
- GPU brackets are quite light
- On the heavier side
Final verdict
Phanteks NV7, Showcase Full-Tower Chassis, provides you with a high airflow performance with 12 fan positions and a seamless tempered glass design. You cannot ignore the Integrated D/A-RGB Lighting and the strong reinforced outer frame. It is designed for a flexible placement and highlights the main system components at the center. you get value for money, with a performance that comes without any compromise.
It supports 12 fans, provides the best cooling performances, and also has triple radiators placed simultaneously. from every angle and side, you get the best view with a clean-looking chassis. Choose from new colors and effects and grab the latest plug-and-play dual-channel D-RGB controller.
The internal and external cable management system makes it spacious and super clean. There are unique cable grids that are meant to route cables in separate lanes. So, why wait? when you can easily grab this premium build spacious chassis.
